Wood is a material that has been widely used in our daily lives for a long time. Due to its popularity, various methods have been developed to process wood effectively. One such method is the use of a jigsaw machine, which is a type of mechanical equipment specifically designed for wood processing. Because of its common usage, it is expected that most individuals are familiar with the operating procedures involved in using a jigsaw machine.
Before operating the machine, the operator must be acquainted with its performance, usage, and precautions. It is strictly prohibited for inexperienced individuals to operate the device alone. Before initiating any action, conduct a check to confirm the normality of air pressure and power supply, the movement of pressing frame or robot arm to both ends, and the ON position of the proximity switch. The panel assembly manufacturer issues a reminder to ensure that after every work cycle, one should pay heed to verify whether the pressing frame or robot arm has been moved to both ends and if the proximity switch is in ON position. Failure to do so may result in machine dysfunction.
When handling a short workpiece, it is crucial to carefully observe the uniformity in the length direction of the measuring cylinder's top plate. It is advisable to avoid exerting pressure on the side or the lower half of the top plate to prevent any potential damage to the lever mechanism. Moreover, it is essential to ensure that the distance between the top plate and the workpiece thickness is maintained at a range of 1-2mm. Deviating from this range can adversely affect the heating and joining efficiency. To construct the push plate, opt for a sturdy wooden material with high durability.